Dreambox-Zone

Emulatori i Cardserveri za HD i UHD prijemnike ● NCam => Autor teme: Pahuljica - Veljača 07, 2019, 10:55:47

Naslov: NCam emulator - Za razlicIte Image i OS
Autor: Pahuljica - Veljača 07, 2019, 10:55:47
Ncam 8.6

Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: zoranbrezo - Veljača 13, 2019, 23:21:29
Ncam V 8.7
 
 
 13-02-2019
 
 -New patch
 -Improvements emu
 -Fix Auto Update Keys
 -Fix some bugs
 -Update a lot of files
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: zoranbrezo - Veljača 17, 2019, 21:08:12
  [SOFTCAM] NCAM 8.8             February 16, 2019   
Ncam V 8.8

    -Improvements emu
    -clean implementation of the card list
    -(rarely used modules are set from default on to default off (no codechange just setup switch))
    -fix reset to wrong defaults
    -[nemu] Changed function declaration to a more clean way
    -[streamserver] Improved Compel algorithm
    (Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)

  **************************************
NCAM 8.8
für DM900UHD, DM920, DM520,DM525, DM820, DM7080 (DEB)
OOZOON, DREAM ELITE, N.EWNIGMA2, GEMINI, Merlin4
New: DM500, DM800HD,DM800HD,DM7020

NCAM 8.8
für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero  (IPK)
OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: zoranbrezo - Veljača 19, 2019, 21:39:49
Ncam.config​ Files​
 
 18.02.2019 @fairman
 
 
 
 fix some wrong code ..
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: zoranbrezo - Veljača 23, 2019, 19:21:53
NCAM 9.0
für DM900UHD, DM920, DM520,DM525, DM820, DM7080 (DEB)


OOZOON, DREAM ELITE, N.EWNIGMA2, GEMINI, Merlin4
New: DM500, DM800HD,DM800HD,DM7020

 
NCAM 9.0
für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero  (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: Pahuljica - Veljača 28, 2019, 13:00:35
Ncam 9.1

Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: matke - Veljača 28, 2019, 20:03:04
Pozz, dali  ncam 9.0 ima autoupdate.Hvala
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: Lav - Veljača 28, 2019, 20:29:50
You are not allowed to view links. Register or Login
Pozz, dali  ncam 9.0 ima autoupdate.Hvala

ima

-Improvements emu
-Fix Auto Update Keys
-Fix some bugs
-[powervu] Added support for hash mode 30
-[dvbapi + powervu] Properly set the descrambler mode for CSA
(When watching a DES powervu channel, switching back to CSA channels required a reboot on some receivers. Other more resilient receivers just threw an error(ioctl(CA_SET_DESCR_MODE): Invalid argument), but continued to work. This was described as a bug of these receivers, but in fact it was a bug of oscam-emu. The correct mode for the CSA algorithm is CBC and not ECB! Thanks to all who helped)
-insert hd03 and hd04 atr
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: matke - Veljača 28, 2019, 21:36:01
 :drinks: Hvala na odgovoru
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: Edo - Ožujak 01, 2019, 18:08:21
Ncam V 9.1


28-02-2019

-Improvement the emu
-[nemu] Fixed potential deadlock in powervu emm handling (When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)

(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler

(build-sh4 (Golden Media-Galaxy innovations-Amiko

(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT

(aarch64-ARM (VU+4K Duo4K + osmio4k

(build-x86-Linux-pc (32bit-i686

(build-x86-Linux-pc (64bit

(build-mips (Tiviar plus and similar

(build-mips-router (Routers Mipsel DD-WRT
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: Edo - Ožujak 05, 2019, 20:41:05
Ncam V 9.2
 
 
05-03-2019 
 
 -Improvement the emu
 -Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
 
 (build-sh4 (Golden Media-Galaxy innovations-Amiko
 
 (cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
 
 (aarch64-ARM (VU+4K Duo4K + osmio4k
 
 (build-x86-Linux-pc (32bit-i686
 
 (build-x86-Linux-pc (64bit
 
 (build-mips (Tiviar plus and similar
 
 (build-mips-router (Routers Mipsel DD-WRT
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: zoranbrezo - Ožujak 06, 2019, 22:17:42
Ncam-9.2
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: zoranbrezo - Ožujak 21, 2019, 20:21:59
Ncam V 9.4
 
 21-03-2019
 
  -[ncam] Better solution for setting CBC mode for CSA (Instead of hard coding the algo mode in the dvbapi_write_cw(), we now initialize the er->cw_ex variable with the proper value)
 -Simpler code for the EXTENDED_CW struct
 -[ncam] Renamed caid_is_biss_static() to caid_is_biss_fixed()           
 
 
 *************
 Here are Only Bin file ..
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: matke - Ožujak 27, 2019, 02:23:23
Gde se moze naci n cam addons. hvala
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: satelittv - Ožujak 27, 2019, 10:14:19
You are not allowed to view links. Register or Login
Gde se moze naci n cam addons. hvala

Kod: You are not allowed to view links. Register or Login
Sorry, you are not allowed to see this part of the text. Molimo You are not allowed to view links. Register or Login ili You are not allowed to view links. Register or Login.


 :drinks:
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: matke - Ožujak 27, 2019, 10:35:44
Bravo moderatoru
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: matke - Ožujak 27, 2019, 13:59:29
some plugins are notavailable
extensions/n cam addons(libxslt.so1:cannot open shared object file: no such file or directory)

Kad sam instalirao ....ovakva poruka izadje :greda:
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: Lav - Ožujak 27, 2019, 20:28:32
biće da nije instalirano jer ne može pronaći fajlove
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: zoranbrezo - Lipanj 11, 2019, 17:37:18
NCam 10.1
Naslov: Odg: NCam emulator - Za razlicIte Image i OS
Autor: zoranbrezo - Lipanj 19, 2019, 13:43:54
[SOFTCAM] NCAM 10.2             June 18, 2019   DM4K                  camd, emu, Ncam, Softcam
Ncam 10.2 compiled and patched by marouan & RAED
-fix MODULE CONSTCW
-fix webif save issue with high var count
 
 
**************************************
NCAM 10.2
für DM900UHD, DM920, DM520,DM525, DM820, DM7080 (DEB)
OOZOON, DREAM ELITE, N.EWNIGMA2, GEMINI, Merlin4, DMS, TSimage, Powersat,nonsolosat
New: DM500, DM800HD,DM800HD,DM7020

Kod: You are not allowed to view links. Register or Login
Sorry, you are not allowed to see this part of the text. Molimo You are not allowed to view links. Register or Login ili You are not allowed to view links. Register or Login.



NCAM 10.2
für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero  (IPK)
Dreambox DM500HD, DM7020,DM7025, DM800HD, DM800HDSE, DM
OpenATV, BlackHole, OpenBH, OpenLD,OpenPLUS, Rudream, OpenPLi, OpenHDF, OpenVix, VTI,OpenSPA, OpenESI,OpenVision, Hyperion PKTEAM, SatDreamGr, OpenDroid, PurE2,EGAMI,OpenNFR,TeamBlue, OpenMIPS…

Kod: You are not allowed to view links. Register or Login
Sorry, you are not allowed to see this part of the text. Molimo You are not allowed to view links. Register or Login ili You are not allowed to view links. Register or Login.